AUTONET TV

Automotive Tips from S T Foreign Auto Service: Wiper Blades ? Signs of Wear

90% of our driving decisions are based on vision. Anything that impedes your vision can affect your driving safety – including a dirty windshield. In that sense, your wiper blades are an important safety system. Most Syracuse drivers will wait until their wipers have failed before they replace them. Then they find themselves in a driving situation around NY when they really need forward visibility only to discover that their wipers are worn or maybe even torn and can’t clear snow or rain from the windshield.

As an important safety system, wiper blades should be replaced BEFORE they fail. Test your wipers at least once a month. If they are not doing the job, your friendly and professional S T Foreign Auto Service service advisor can replace them for you.

Give us a call.

S T Foreign Auto Service
415 E Brighton Ave.
Syracuse, NY 13210
315-478-2161
http://www.stforeignauto.com

How Much is Enough for Syracuse Auto Owners? Tire Tread Depth

Most Syracuse drivers know that tires wear out and that the wear has to do with tread depth. Most of us have heard that “bald” tires are dangerous, but most of us picture a tire with no tread at all when we think of a bald tire. And when we take our vehicles in for preventive maintenance, the technician tells us they're need to be replaced long before all the tread is worn off. Just how much tire tread wear is too much? And how can you tell? Tires are and their condition is important to the safe handling of a vehicle, so it's for Syracuse vehicle owners to know the answers to these questions.

First of all, it's important to understand that there may be a legal limit to tread wear. If your tires are worn past this limit, you have to replace them to be in compliance with NY auto safety laws. That's why measuring your tread wear is part of a vehicle safety inspection.

In some jurisdictions, tread must be at least 1.6 millimeters or 2/32 of an inch thick. This standard has been in effect since 1968. But this standard has recently been called into question, and some NY professionals are arguing that it be changed.

The safety issue that has brought this standard under scrutiny is the ability of a vehicle to stop on a wet surface. When a vehicle has trouble stopping, most Syracuse drivers immediately look at the brakes as the source of the problem. But tires are crucial to safe stopping distances because they provide the traction required in a stop.

A tire's contact with the road surface creates traction, which allows for effective braking. On a wet surface, a tire only has traction if it can get to the road's surface. So tire tread is designed to channel water out from under the tire to allow it to stay in contact with the road. If the tire can't shift the water, then it starts to “float.” This condition is called hydroplaning. It is very dangerous for Syracuse drivers since the vehicle won't stop no matter how hard the driver presses the brakes. Steering control is also lost.

A recent study tested the stopping ability of a passenger car and a full-sized pick-up on a road surface covered with only a dime's depth of water (less than a millimeter). The vehicles were traveling at 70 mph (112 kph) when they stopped on the wet surface. At 2/32 (1.6 mm) tread depth, the stopping distance was double that of a new tire. The passenger car was still traveling at 55 mph (89 kph) when it reached the stopping distance it experienced with new tires.

Let's suppose that you're on a busy Syracuse road in a light drizzle and a vehicle stops suddenly in front of you. You just bought new tires and you brake hard, missing the vehicle with only inches to spare. If you hadn't bought those new tires, you would have crashed into that vehicle at 55 mph (89 kph). That is a major difference.

What if your tires had a tread depth of 4/32 (3.2 mm)? You would have crashed into that vehicle at 45 mph (72 kph). Still not a good situation. But it's better.

Now what if you were driving that pick-up truck? You wouldn't have missed that vehicle in the first place, and you would have crashed at higher rates of speed in both of the other scenarios. The heavier your vehicle, the longer its stopping distance. It's a matter of physics.

The results of this test has led Consumer Reports and others to ask that the standard for tread wear be changed from 2/32 (1.6 mm) to 4/32 (3.2 mm). The increased standard will improve safety on the road and save lives here in NY and nationally.

Of course, until the standard changes, you'll have to decide whether you'll be willing to replace your tires a little sooner.

You can use an American quarter to tell if your tread wear is down to 4/32 (3.2 mm). Place the quarter into the tread with George's head toward the tire and his neck toward you. If the tread doesn't cover George's hairline, you're under 4/32 (3.2 mm). With a Canadian quarter, the tread should cover the digits of the year.

You can measure the 2/32 inch (1.6 mm) tread wear with a penny. If the tread touches the top of Abe's head, it's at 2/32 (1.6 mm). Tires are super important when it comes to vehicle care. But their condition has a major impact on safety. We need to decide whether to sacrifice safety for economy. Keeping our tread wear above 4/32 in (3.2 mm) is good auto advice.

S T Foreign Auto Service
415 E Brighton Ave.
Syracuse, NY 13210
315-478-2161
stforeignautoservice.autotipsblog.com

Clean Air for Your Engine: A New Engine Air Filter at S T Foreign Auto Service

All of us in Syracuse know we have to get the oil changed in our vehicles periodically. That's just part of good vehicle care. But when S T Foreign Auto Service technicians change your oil, they also usually inspect your air filter. That's why they sometimes let you know that your air filter needs to be changed before releasing your vehicle.

Don't just chock this up to trying to sell you something else. Syracuse area drivers really do need to change their air filter when it gets dirty. You can check your owner's manual to see how often your air filter should need to be changed, but remember, if you live in an area in NY with poor air quality, or if you drive a lot or drive under harsh conditions in the Syracuse area, you may need to change that filter more often than is recommended.

Changing an air filter isn't guesswork. If a filter's dirty, it needs to be replaced. Air filters aren't very expensive at S T Foreign Auto Service. But the problems they cause if Syracuse auto owners don't change them can get to be.

S T Foreign Auto Service
415 E Brighton Ave.
Syracuse, NY 13210
315-478-2161
http://www.stforeignauto.com

A Bright Idea

You've probably noticed how much easier it is to see when you're driving in the daytime as opposed to at night. It's one of the main reasons about half of all fatal vehicle accidents happen when it's dark.

That's why it's important that your vehicle's headlights are in top condition and working the way they should.  That means that they're aimed correctly and producing the amount of light they are intended to produce.

For many years, headlights were a standardized size and shape.  They were what is called a "sealed beam," and when you needed to replace one, it was pretty simple.  You just took the old one out and plugged a new one in. 

But now there are hundreds of different types of lighting systems on vehicles, producing light with such illuminating technology as light-emitting diodes (LEDs), halogen bulbs, high-intensity discharge (HID) bulbs and more.  Some vehicles have systems that turn your lights in the direction you turn your steering wheel so you can more clearly see where you are going.

Now that it's not so simple to change headlamps or bulbs, it's wise to consult your service advisor.  She or he can tell you what your options are.  There may be ways you can upgrade your lighting with new headlamps or components, but it's important not to install new parts that could damage your vehicle.  For example, the headlight housing could be damaged if a bulb burns too hot for its design. 

It's also good to check regulations and laws where you live.  Some regulate the color of light your headlamps can shine and how bright they can be. It's wise to leave it up to a technician to replace your headlamps.  Some are tricky to get at, and modern engine compartments can be packed so tightly, it's hard to maneuver around all of the other engine components to reach the headlamp compartment.

Oh, one other thing to keep in mind.  Even if your headlamps are both working, you might notice people are flashing their lights at you, even when you don't have the high beams on.  That could mean your headlamps are aimed wrong; for the safety of the other drivers and yourself, have your technician check your headlamps' aim.

You'll see the light when you have good visibility at night.